3D Printer Build Plate Bambu H2D H2S 355x346mm CryoGrip Frostbite Spring Steel

BIQU CryoGrip Pro Frostbite Panda Cold Build Plate 355 x 346mm for Bambu Lab H2D / H2S

The BIQU CryoGrip Pro Frostbite Panda is a double-sided spring steel build plate designed for compatible Bambu Lab H2D and H2S 3D printers. Measuring 355 x 346mm, it is designed for machines with a 350 x 325mm print area and provides strong first-layer adhesion at comparatively low bed temperatures.

The Frostbite surface is designed for PLA printing at approximately 30–50°C and PETG at approximately 50–70°C. Its flexible spring steel construction allows completed prints to be released by flexing the plate, while the double-sided coated surface provides two usable printing sides.

Please Note: The manufacturer recommends this Frostbite plate primarily for PLA and PETG. Use with ABS and TPU is not recommended, as removing these materials may require a scraper and could damage the build surface.

Specifications

• Brand: BIGTREETECH / BIQU
• Product Range: Panda CryoGrip Pro Frostbite
• Type: Cold build plate
• Dimensions: 355 x 346mm
• Compatible Print Area: 350 x 325mm
• Compatibility: Bambu Lab H2D / H2S
• Material: Flexible spring steel
• Surface: Double-sided Frostbite coating
• PLA Bed Temperature: 30–50°C
• PETG Bed Temperature: 50–70°C

Key Features

• 355 x 346mm build plate designed for compatible Bambu Lab H2D and H2S 3D printers.
• Double-sided design provides a usable printing surface on both sides.
• Frostbite surface provides strong first-layer adhesion.
• Designed to allow PLA printing at comparatively low bed temperatures of approximately 30–50°C.
• Suitable for PETG printing at approximately 50–70°C.
• Strong magnetic attachment helps keep the plate securely positioned during printing.
• Flexible spring steel construction allows the plate to be bent to help release completed models.
• Surface adhesion can be restored after extended use by cleaning the plate with clean water.
• Multi-layer cobalt oxide coating is designed to provide impact and corrosion resistance.

Important Information

ABS and TPU are not recommended for this Frostbite surface because removal may require a scraper and could damage the coating. Allow the plate to return to its flat shape after flexing and follow the printer and build-plate instructions when selecting bed temperatures and filament settings.

Condition

Brand new unless otherwise stated. The product itself is brand new and unused. Please note that the outer packaging only may occasionally show minor cosmetic wear from storage or handling; the item inside is unaffected.

Delivery

We aim to dispatch all orders within 1 working day. Orders are sent using a next day delivery service where applicable. International delivery is available where supported by the marketplace. Please refer to the delivery information shown on the marketplace for estimated delivery times and any applicable charges.

Returns

We offer 60 day returns. Please use the returns process provided by the marketplace where the item was purchased. The returns terms shown on the individual listing apply.